Adjusting Colour Registration (Convergence); Introducing And Using The Menu System - Sony KP-44PX2U Instruction Manual

Due to the earth's magnetism, the picture might become undefined and you could see different colours on the outlines of
the images.
In that case, proceed as follows.
Your projection TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the
Remote Control to operate the menu system:
Press the MENU button to switch the first level menu on.
• To highlight the desired menu or option, press
• To enter the selected menu or option, press
• To return to the last menu or option, press
• To alter the settings of your selected option, press
• To confirm and store your selection, press OK.
Press the MENU button to remove the menu from the screen.
10
First Time Operation - Menu System
Press on the mark , on the right side of the projection TV.
Press / button.
The Auto Convergence function works for about 10 seconds. When the white
cross disappears from the screen, your projection TV is ready for use.
The Auto Convergence function does not work when:
• no signal is input.
• the input signal is weak.
• the screen is exposed to spotlights or direct sunlight.
• you watch the teletext broadcast.
• you watch NexTView.
or
.
.
.
/ / or .
MENU
MENU