Manual Programme Preset - Sony KP-41PX2 Instruction Manual

Level 1
a)
Preset channels or the VCR channel one by one to the programme order of your choice. To do this:
1 After selecting the "Manual Programme Preset" option, press
Press or to select which programme number you want to preset the channel on (for VCR, select programme number
"0"). Then press
2
The following option is only available depending on the country you have selected in the "Language/Country"
menu.
After selecting the System option, press
European countries, D/K for eastern European countries, L for France or I for United Kingdom). Then press
3 After selecting the Channel option, press
TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press
you have tuned the desired channel, press OK twice to store.
Repeat all the above steps to tune and store more channels.
b)
Label a channel using up to five characters.
To do this: highlighting the Programme option, press the PROG +/- button to select the programme number with the channel
you wish to name. When the programme you want to name appears on the screen, select the Label option and press
press or to select a letter, number or "-" for a blank. Press
the same way. After selecting all the characters, press OK twice to store.
c)
Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture, however you
can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press
or to adjust the fine tuning between -15 and +15. Finally press OK twice to store.
d)
Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.
To do this: highlighting the Programme option, press the PROG +/- button to select the programme number you want to skip.
When the programme you want to skip appears on the screen, select the Skip option and press
Yes. Finally press OK twice to confirm and store.
To cancel this function afterwards, select "No" instead of "Yes" in the step above.
e)
View and record correctly scrambled channels when using a decoder connected directly to Scart
This option is only available depending on the country you have selected in the "Language/Country" menu.
To do this: select the Decoder option and press
To cancel this function afterwards, select "Off" instead of "On" in the step above.
16
Menu System
Level 2
.
. Then press
. Then press the number buttons to enter directly the channel number of the
. Next press
Level 3 / Function

MANUAL PROGRAMME PRESET

The "Manual Programme Preset" option in the "Set Up" menu
allows you to:
then with Programme option highlighted press
or to select the TV Broadcast system (B/G for western
to confirm this character. Select the other four characters in
or to select On. Finally press OK twice to confirm and store.
.
.
or to search for it. When
. Next
. Next press
. Next press or to select
3/ 3 or through a VCR.
S
continued...