Sleep Timer; Av3 Output; Pip Input - Sony KP-41PX2 Instruction Manual

Level 1
•While watching the TV, you can press the
•One minute before the projection TV switches itself into standby mode, the time remaining is displayed on the TV screen automatically.
If you select "AUTO", the output signal will always be the same one that is displayed on the screen.
If you have connected a decoder to the Scart
the "AV3 Output" to "AUTO" or "TV" for correct unscrambling.
A
A
Level 2
button on the remote control to display the time remaining.
3/
B
B A
B B
Level 3 / Function

SLEEP TIMER

The "Sleep Timer" option in the "Features" menu allows you to
select a time period for the TV to switch itself automatically into the
standby mode.
To do this: after selecting the option press
set the time period delay (max. of 4 hours).

AV3 OUTPUT

The "AV3 Output" option in the "Features" menu allows you to
select the source to be output from the Scart connector
that you can record from this Scart any signal coming from the
projection TV or from an external equipment connected to the Scart
connectors 1/ 1 or
4 and 4.
If your VCR supports Smartlink, this procedure is not
necessary.
To do this: after selecting the option, press
select the desired output signal: TV, AV1, AV2, AV4, YC4 or
AUTO.
3 or to a VCR connected to this Scart, please remember to change back
S

PIP INPUT

The "PIP Input" option in the "Features" menu allows you to select
the source you want to watch in the "PIP" screen.
To do this: after selecting the option, press
or to select the desired source AV1, AV2, AV3, AV4 or TV.
Finally press OK to store.
To watch the "PIP" screen with the selected source, press the
/ button on the remote control.
You can swap the screens by pressing the
remote control.
, then press
3/
2/ 2 or front connectors
. Then press
. Then press repeatedly
/ button on the
continued...
Menu System
or to
3 so
S
4 or
S
GB
or to
13