Toshiba MMU-P0121H Service Manual page 122

Service P.C. Board Selection Information
[4-way air discharge cassette type]
Service P.C. board selection corresponded table (Main P.C. board MCC-1361)
The indoor control P.C. board (MCC-1361) can correspond to multiple models. When replacing P.C. board
assembly, set the DIP switch, rotary switch, and jumper(s) according to the following description.
Switch set up
1 SW01 Indoor unit No.
2 SW02 Network address
3 SW03
4 SW05 (Bit 1)
5 SW05 (Bit 2)
6 SW06
7 SW07
8 SW08 Horse power set up : Match to set up contents of P.C. board before replacement.
Jumper set up
1 Match to the set up contents of P.C. board before replacement except for J15, J16 and J17.
2. J15, J16, J17 : For the following models, set up the jumper(s) according to the table.
Model name
MMU-
P0121H
Part No.
¡
J15
J16
J17
: Match to No. which the rotary switch is set up.
: Master unit ...... 1
: Server units ..... 2 to 16
: Match to set up contents of P.C. board before replacement.
: Match to set up contents of P.C. board before replacement.
: Match to set up contents of P.C. board before replacement.
: Set to OFF side.
: Match to set up contents of P.C. board before replacement.
: Match to set up contents of P.C. board before replacement.
P0151H
P0241H
P0181H
¡
X
¡ ¡
X
X X X
Service P.C. board part name : <MCC-1361>
O : Provided (Original), X : None (cut)
P0301H P0361H
¡
X
X X
¡ ¡
CM02C04S
3-119
SN 4316V164
Status at shipment
P0481H
from factory
¡
X
¡ ¡
¡ ¡