Routine Maintenance
Turn Power Switch OFF.
1.
Unplug power cord from the outlet and coil around Power Cord
2.
Quick Release.
Remove and rinse tools in clean, running water. Dry and
3.
replace on tool caddy.
Coil Flex Hose around storage brackets on Tool Caddy.
4.
Remove Tank-In-Tank, dispose of dirty water. Refer to the
5.
Features section on Pages 8-9.
Rinse out Tank-In-Tank and replace on the machine; Clean out
6.
Lint Screen.
Clean out the Flow Indicator Filter each time it is used to ensure
7.
best cleaning performance. Unscrew the Flow Indicator Cap, lift
out the Red Rotor and White Filter. Rinse all three parts in tap
water. Replace the Filter and Rotor. Replace the Flow Indicator
Cap; turn until snug, do not over-tighten.
Wipe all exterior surface with a soft cloth.
8.
Store cleaner upright in a protected, dry area.
9.
Note: OxyPro uses water and must not be stored where
there is a danger of freezing. Freezing will damage
internal components and void the warranty.
When carpet is dry, vacuum again to remove hair and fuzz
10.
that the OxyPro may have loosened.
18
ug310-5829_7920K_405.indd 18
ug310-5829_7920K_405.indd 18
Cap
Rotor
Filter
5/5/06 11:25:24 AM
5/5/06 11:25:24 AM