Smartmix; Smarttemp - Bissell 7920 SERIES User Manual

Special Features of your BISSELL OxyPro
The BISSELL SmartClean
The OxyPro is a home cleaning system that automatically mixes hand
hot tap water with BISSELL Advanced Deep Cleaning Formula and
heats the solution as it is applied to the carpet. The combination of
heated cleaning solution, powered brush and suction provide a safe
and effective method of cleaning.

SmartTemp

Temperature control automatically heats the cleaning solution
as it is being applied to the carpet (*) to safely optimize
cleaning effectiveness.
The Power Switch controls power to the machine and the
1.
SmartTemp feature.
*SmartTemp heats the cleaning solution for carpet
and bare floor application only. It does not heat
solution sprayed through the accessory tools.
The SmartTemp Ready Light indicates the heater is ON. It
2.
is found on the front of the handle where it is easy to see
while you clean. Wait two minutes for the heater to warm
up before beginning to clean.
SmartTemp increases the water temperature up to 25° and
3.
will not allow it to exceed 180°.

SmartMix

Provides custom control for each cleaning job.
Lift the SmartMix Bottle up and out of the
1.
machine base.
Turn the SmartMix Bottle over so that the Valve Cap is
2.
in an upward position. Unscrew the Valve Cap and fill the
SmartMix Bottle to the mark with BISSELL Advanced Deep
Cleaning Formula.
Replace the Valve Cap, turning until snug.
3.
6
ug310-5829_7920K_405.indd 6 ug310-5829_7920K_405.indd 6
™
System
™
™
™
Power Switch
SmartTemp Ready Light
SmartMix
Bottle
Valve Cap
ON
5/5/06 11:25:17 AM 5/5/06 11:25:17 AM