Introduction; Quick Start Guide; Ds90Ub954-Q1Evm; Snlu223 – August - Texas Instruments DS90UB954-Q1EVM User Manual

www.ti.com
Trademarks
All trademarks are the property of their respective owners.
1

Introduction

NOTE: The demo board is not optimized for EMI testing. The demo board was designed for easy
accessibility to device pins with tap points for monitoring or applying signals, additional pads
for termination, and multiple connector options.
2

Quick Start Guide

2.1 System Requirements
2.1.1 Included Components
The major components of the DS90UB954-Q1EVM are:
• DS90UB954-Q1
• On-board Power-over-Coax (POC) interface
• Two FAKRA coax connectors for digital video, power, control and diagnostics
• Samtec QSH type connector for CSI-2 interface
2
• On-board I C programming interface
SNLU223 – August 2017
Submit Documentation Feedback
Figure 1. DS90UB954-Q1EVM
Copyright © 2017, Texas Instruments Incorporated
Introduction
DS90UB954-Q1EVM Quick Start
3