Motorola V60 Series Manual page 50
For mercedes-benz my 2000-2005
Hide thumbs
Also See for V60 Series:
- User manual (185 pages) ,
- Operation manual (17 pages) ,
- Installation instruction (16 pages)
Table of Contents
Advertisement
J2-Telematic Connector/ PIN-25
/
TD BUT - Switch.
J2-Telematic Connector/ PIN-26
/
EC BUT - Switch.
J2-Telematic Connector/ PIN-27
/
BPS I/F RX - Control Data.
NOT USED.
J2-Telematic Connector/ PIN-28
/
BPS I/F ENA - I/F Control.
NOT USED.
J2-Telematic Connector/ PIN-29
/
Cntrl Relay - NOT USED.
J2-Telematic Connector/ PIN-30
/
Spkr In+ - Audio Signal from
AGW.
NOT USED.
J2-Telematic Connector/ PIN-31
/
D-CAN Lo - Diagnosis CAN.
NOT USED.
J2-Telematic Connector/ PIN-32
/
D-CAN Shield - Shielding.
J2-Telematic Connector/ PIN-33
/
Eng I/F Rx.
J2-Telematic Connector/ PIN-34
/
Eng I/F Tx.
J2-Telematic Connector/ PIN-35
/
Crash - Digital Crash Input
(200 Bd).
J2-Telematic Connector/ PIN-36
/
BPS I/F TX - Control Data.
NOT USED.
J2-Telematic Connector/ PIN-37
/
BPS + - Backup Power Line.
J2-Telematic Connector/ PIN-38
/
BPS + - Backup Power Line.
DTC will be set. No activation.
DTC will be set. No activation.
None.
None.
None.
None.
None.
None.
Unable to provide Engineering Test.
DTC will be set.
Unable to provide Engineering Test.
DTC will be set.
No Crash signal will be receive. Loss
of functionality. DTC will be set.
None.
Unable to activate the BPS device.
Loss of functionality. DTC will be set.
Unable to activate the BPS device.
Loss of functionality. DTC will be set.
DTC will be set. No activation.
DTC will be set. No activation.
None.
None.
None.
None.
None.
No messages from the CAN
interface. Lost of diagnostic.
Unable to provide Engineering Test.
DTC will be set.
Unable to provide Engineering Test.
DTC will be set.
No Crash signal will be receive. Loss
of functionality. DTC will be set.
None.
Unable to activate the BPS device.
Loss of functionality. DTC will be set.
Unable to activate the BPS device.
Loss of functionality. DTC will be set.
DTC will be set. Unable to turn Off.
DTC will be set. Unable to turn Off.
None.
None.
None.
None.
None.
No Shield for the CAN. No
messages from the CAN interface.
Lost of diagnostic. DTC will be set.
Unable to provide Engineering Test.
DTC will be set.
Unable to provide Engineering Test.
DTC will be set.
No Crash signal will be receive. Loss
of functionality. DTC will be set.
None.
Unable to turn Off the BPS device.
Loss of functionality. DTC will be set.
Unable to turn Off the BPS device.
Loss of functionality. DTC will be set.
Advertisement
Chapters
Table of Contents
