0506: Paper Alignment in 2nd Stacker Tray Across Feed Dir. 2
Adjust the width of the sub jogger in order to reduce vertical variation in paper
alignment due to difference in size, thickness, and curl of paper, when the second
stacker is installed.
Press [+] to make the width of the sub jogger wider, or [-] to make narrower.
A3
L
B4 JIS
L
11x17
L
1
8
/
x14
L
2
Other Paper Sizes
Note:
• This setting is applied to the downstream stacker when two stackers are
connected.
0507: Maximum Stack Quantity in Stacker Tray
Set the maximum number of sheets for the stacker tray.
The maximum number of sheets you can set differs depending on the size,
thickness, and curl of paper.
Set the maximum number by specifying a ratio based on the number of sheets.
If the unit detects that the number of sheets reaches the set upper limit, it will
generate a warning message.
Maximum Stack Quantity in Stacker Tray
Note:
• If two stackers are attached—upstream and downstream—this setting is applied
to both.
2. Details of Menu Items in Adjustment Settings for Skilled Operators Menu
Setting
Setting
Default
Max.
Value
Value
0.0
1.0
Selection
100%
75%
50%
25%
54
Min.
Step
Value
-1.0
0.1
mm
Default Value
100%
Unit