Ricoh Pro C901S Manual page 28

2.2.3 Paper Feed Adjustment
0103: Double Feed Detect
Specify whether or not to detect paper double feeding. Setting can be made for
each tray independently.
If this is set to "On", the machine stops when it detects paper double feeding, so as
to prevent mixing of unprinted paper.
Tray 1
Tray 2
Tray 3: Wide LCT
Tray 4: Wide LCT
Tray 5: Wide LCT
Tray 6: Wide LCT
Tray 3: LCT
Tray 4: LCT
Tray 5: LCT
Tray 7
Note:
• Settings for LCT are available only on Pro C901.
• The machine may mistakenly detect double feeding when using special paper
(double-layer paper, such as release paper). In such a case, set this to "Off".
0114: Adjust Wide LCT Fan Level
Adjust the airflow of the wide LCT fan for each tray.
High airflow can reduce the multi-feeding or paper jam problems when printing on
coated or heavy weight paper.
Press [+] to increase the airflow, or [-] to decrease.
Tray 3: Wide LCT
Tray 4: Wide LCT
Tray 5: Wide LCT
Tray 6: Wide LCT
2. Details of Menu Items in Adjustment Settings for Skilled Operators Menu
Setting
Setting
Selection
On
Off
Default Max.
Value Value
70 100
28
Default Value
On
Min. Step
Value
10 10 %
Unit