Ricoh Pro C901S Manual page 35

0207: Toner Density Sensor Initial Setting
Initialize the developer manually.
This operation takes about 1 minute.
Select Colour(s)
Execute Initial Setting
Note:
• After replacing the developer, the machine should automatically initialize the
developer to adjust the toner density. If it does not, execute the initialization
manually with this function.
0208: Execute Toner Refreshing
Some toner is exhausted forcibly, and new toner is added into the development
unit. Mottling can be reduced.
This operation takes about three minutes for a single color and about six for all
colors. Do not open the left or right front cover during the operation.
All Colours
Black
Cyan
Magenta
Yellow
2. Details of Menu Items in Adjustment Settings for Skilled Operators Menu
Setting
Setting
Black
Yellow
Cyan
Magenta
Black, Yellow
Black, Cyan
Black, Magenta
Cyan, Yellow
Magenta, Yellow
Cyan, Magenta
Black, Cyan, Yellow
Black, Magenta, Yellow
Black, Cyan, Magenta
Cyan, Magenta, Yellow
All Colours
Press [OK].
Press [OK].
35
Selection
Selection