Loc Bc Approach - Garmin GFC 500 Manual

LOC BC APPROACH

1.
Navigation Source. .................................................................................... SELECT CDI to VHF Nav
2.
Course Pointer .................................................................................. SET CDI to LOC Front Course
Ensure that the current heading will result in a capture of the selected course.
3. NAV Key .................................................................................................. PRESS, verify BC ARMED
4. BC Mode ............................................................ VERIFY airplane Captures and Tracks BC Course
5. Altitude Preselect ................................................................ SET to next required step down altitude
6. Missed Approach Altitude ......................................................... SET when in ALT mode at the MDA
At Missed Approach Point:
7. AP DISC / TRIM INT button .................................... PRESS, Continue visually for a normal landing
Or
8. GO AROUND (GA) button ....................................... PRESS, Execute Missed Approach Procedure
9. Apply GA power.
Pressing the GA button will not disconnect the autopilot. Select NAV or HDG mode to fly the
missed approach procedure.
AFMS – GFC 500 Autopilot in Textron 182 Series
Page 4–10
Tune and Identify an ILS station frequency
NOTE
(when heading is within 75 degrees of BC course)
NOTE
190-02291-06 Rev. 2