Gps Approach (Lpv, Lnav/Vnav, Lp+V, Or Lnav+V); Gps Approach (Lp, Lnav) - Garmin GFC 500 Manual

GPS APPROACH (LPV, LNAV/VNAV, LP+V, or LNAV+V)

1.
Navigation Source ............................................................................................ SELECT CDI to GPS
2. Course Pointer ..................................................................... VERIFY CDI set to the Desired Course
Ensure that the current heading will result in a capture of the selected course.
3. APR Key .................................................................................. PRESS, verify GPS and GP ARMED
4. GPS and GP Mode ......................................... VERIFY airplane Captures and Tracks GPS and GP
5. ALT Key ...................................... PRESS to level off at the MDA for a LP+V or LNAV+V approach
At DA (LPV or LNAV/VNAV approach), or MDA and Missed Approach Point (LP+V or LNAV+V),
6. AP DISC / TRIM INT button .................................... PRESS, Continue visually for a normal landing
Or
7. GO AROUND (GA) button ....................................... PRESS, Execute Missed Approach Procedure
8. Apply GA power.
9. Set missed approach altitude in the altitude preselect.
Pressing the GA button will not disconnect the autopilot. Select NAV or HDG mode to fly the
missed approach procedure.

GPS APPROACH (LP, LNAV)

1.
Navigation Source ..................................................................................... SELECT GPS on the CDI
2. Course Pointer .................................................................... VERIFY CDI set on the Desired Course
Ensure that the current heading will result in a capture of the selected course.
3. NAV Key ............................................................................................... PRESS, verify GPS ARMED
4. GPS Mode ....................................................... VERIFY airplane Captures and Tracks GPS Course
5. Altitude Preselect ................................................................ SET to next required step down altitude
6. Missed Approach Altitude ......................................................... SET when in ALT mode at the MDA
At Missed Approach Point,
7. AP DISC / TRIM INT button .................................... PRESS, Continue visually for a normal landing
Or
8. GO AROUND (GA) button ....................................... PRESS, Execute Missed Approach Procedure
9. Apply GA power.
Pressing the GA button will not disconnect the autopilot. Select NAV or HDG mode to fly the
missed approach procedure.
190-02291-06 Rev. 2
NOTE
NOTE
NOTE
NOTE
AFMS – GFC 500 Autopilot in Textron 182 Series
Page 4–9