Care And Maintenance - CDA EVP61 Installation, Use And Maintenance Manual

Care and Maintenance

IMPORTANT : DO NOT PERFORM
MAINTENANCE OR CLEANING OF
THE EXTRACTOR WITHOUT FIRST
SWITCHING OFF THE ELECTRICITY
SUPPLY.
Cleaning
Fig. 2
You should use a nonabrasive cleaner.
Any abrasive cleaner (including Cif) will
scratch the surface and could erase
the control panel markings.
You can clean your extractor effectively
by simply using a dilute solution of
water and mild detergent and drying to
Fig. 3
a shine with a clean cloth.
Cleaning the grease filter
The grease filters should be kept clean to minimise the risk of fire.
When the display flashes alternating the speed selected with the
letter "A", or at least once a month, you should remove and clean the
grease filters with hot soapy water. You can also wash the grease
filters in a dishwasher, ensuring that you place them in an upright
position to prevent damage from other items in the dishwasher. After
rinsing and drying, replace the filters. After the grease filters have
been replaced, the electronic memory must be reset by touching key
"A" for approximately five seconds, until the letter "A" stops flashing.
6