Transmit Power; Privacy Talk - Kenwood ProTalk NX-P500 User Manual

TRANSMIT POWER

You can adjust the transmit power on all channels. Selecting low power will allow
longer use of the battery pack. Selecting high power will allow you to transmit
further, in case the other party is too far away for low power usage.
To change the transmit power:
1
Enter the Channel menu mode {p.24}.
2
Press the button programmed as [Channel Up] or [Channel
Down] to select "
3
Press the button programmed as [Channel Menu] then press the button
programmed as [Channel Up] or [Channel Down] to select your desired
value.
• The icon appears on the appear when Transmission.
4
Press the button programmed as [Channel Menu] to confirm the selection,
then press the PTT switch or the Side button to exit to the operation mode.

PRIVACY TALK

Scrambler (Analog)
When the Channel Type is Analog, whereas the QT and DQT functions allow
you to ignore unwanted calls, Privacy Talk allows you to hold a conversation in
complete privacy. When this function is activated, any other party that is listening
to your channel will be unable to understand your conversation.
1
Enter the Channel menu mode {p.24}.
2
Press the button programmed as [Channel Up] or [Channel
Down] to select "
3
Press the button programmed as [Channel Menu] then press the button
programmed as [Channel Up] or [Channel Down] to select your desired
value.
• The
PRIVACY
4
Press the button programmed as [Channel Menu] to confirm the selection,
then press the PTT switch or the Side button to exit to the operation mode.
".
High
Switch transmit power to 2.0 W. ( icon :
Low Switch transmit power to 1.0 W. ( icon : )
(Analog)
OFF The Scrambler (Analog) function is deactivated.
ON The Scrambler (Analog) function is activated.
icon appears on the display when "ON " is selected.
".
25
)