Kenwood ProTalk NX-P500 User Manual page 20

BROADCAST CALLS:
For example, transceiver A is calling transceivers B ~ F.
1
Press and hold the button programmed as [Channel Menu].
or press the button programmed as [ID List].
• The ID List you called last is appeared.
2
Press the button programmed as [Channel Up] or [Channel
Down] to select an Broadcast ID number (ALL-15 in this
example).
• " " (Broadcast Call) represents a group of stations.
3
Press the PTT switch to transmit the selected ID.
• When a call is received, "
along with the caller's ID number.
RECEIVING A SELCALL
When a Selcall is received, "
with the caller's ID number.
Press the PTT switch and speak into the speaker area to respond to the call, then
continue the call as normal. When the call is finished, Press and hold the Side
button to exit to operating mode.
" appears on the display,
", " " or " " appears on the display along
20
Transceiver A
Transceiver A
Transceiver B ~ F