Transmit Power Save - Kenwood FreeTalk UBZ-LH14 Instruction Manual

TRANSMIT POWER SAVE
The purpose of Transmit Power Save is to prevent
transmitting for foo long. This function is useful, for
exampie, when you accidentally keep the PTT switch
pressed. You can switch the limit ime between 3 (defauit}
and 10 minutes.
nd hold the UP key, then press the _
| POWER switch.
noe
; Press the UP or DOWN key to select
=*tO" (Menu No. 8).
ee
cr | Press the MODE key to switch
' between 3 and 10 minutes.
i Press the PTT switch to exit Menu
» mode.
Holding down the PTT switch for more than ihe selected
lime causes the transceiver to generate a beep and stop
transmitting. Release, then press the PTT switch again
to resume transmitting.
AKA