Super Lock - Kenwood ProTalk NX-P500 User Manual

SUPER LOCK

You can lock other than PTT switch,
Volume control to prevent accidentally changing the setting mode settings.
If necessary, it is also possible to avoid locking for the functions shown below.
To select the super lock setting:
1
With the transceiver power OFF, press and hold the PTT
switch and the Side button while turning the transceiver power
ON.
2
Press the button programmed as [Channel Menu] then press the button
programmed as [Channel Up] or [Channel Down] to select your desired
value.
3
Press the Menu button, PTT switch, or Side button to exit Super Lock Setting
mode.
• The icon appears on the display when the transceiver buttons are
locked. No icon appears when they are unlocked.
The Super Lock function is deactivate.
With this setting, the following operations are still available even during
Super Lock.
• Power-switch/ Volume control
• PTT switch
• Calling Alert
• Monitor
During Super Lock, the following buttons are still available in addition to
setting in SL-PTT.
• Channel Up
• Channel Up (Continuous)
• Channel Down
• Channel Down (Continuous)
buttons, or the Power switch/
/
• Monitor Momentary
• Second PTT
• Squelch Off
• Squelch Off Momentary
• Home Channel
52