Furuno FAR-2218 Operator's Manual page 263

ALR ALF
Alert ID Alert ID
86 52002,04 HW STATUS ER-
Remedy: Press the ALARM ACK key. Have a qualified technician check the processor unit.
87 52002,05 HW STATUS ER-
Remedy: Press the ALARM ACK key. Have a qualified technician check the processor unit.
- 52729,01 POSN INT ERROR
Remedy: Press the ALARM ACK key. Check the output settings for the connected EPFS device.
Adjust output interval (cycle) as required.
792 52792,01 CHART ERROR*
Remedy: Press the ALARM ACK key. Have a qualified technician check the processor unit.
1
* : When LOG(WT) is not selected, the alert priority for this alert is changed to "Caution". Caution
level alerts are not shown on B/W-type radars.
2
* : When LOG(BT) is not selected, the alert priority for this alert is changed to "Caution". Caution
level alerts are not shown on B/W-type radars.
3
* : This alert is output only on R-type radars.
4
* : This alert is output for magnetron radars only.
5
* : This alert appears on S-BAND SSD radars only.
6
* : This alert is output only on A/B/W-types with radar plotter functionality
7
* : When no AIS data is received, the message "AIS COM ERROR" appears in the Alert Box.
Check connection with the AIS transponder.
When the AIS function is disabled: Above message is prioritized as a Caution level alert for
IMO/R-types. A/B/W-types do not show this alert.
When the AIS function is active: Above message is prioritized as a Warning level alert for all
radar types.
8
* : For R-type radars only, this alert has the following attributes: ALR number: 533, Priority: Warn-
ing, Category: A.
9
* : This alert appears only on A/B-type radars when Dual Radar mode is active and enabled.
APPENDIX 3 ALERT CODES, MESSAGES & MEANINGS
Alert title
6
ROR*
6
ROR*
6
Priority &
Category
Warning Message: "RPU FAN (RP) NO ROTA-
Cat: B TION"
Meaning: The RPU fan on the RP
board, in the processor unit, is stopped
or disconnected.
Warning Message: "RPU RP HW ERROR"
Cat: B Meaning: The RP board has stopped
working.
Caution Message: "POSN INTERVAL ER-
Cat: B ROR"
Meaning: Positioning interval (Lat/Lon)
cycle has exceeded 10 seconds for a
period of three minutes or more.
Warning Message: "CHART MEMORY ER-
Cat: B ROR"
Meaning: An error has occurred while
loading chart data.
Alert description
AP-19