Furuno FAR-2218 Operator's Manual page 113

• Radar functions are controlled independently, dependently or commonly depending
on selection as [MASTER] or [SLAVE] (see the following table).
Radar Functions
AIS function
Brilliance
Echo trails
EBL
Lat/long data
Presentation mode
Speed data
Target alarm
TT, AIS on/off
TT, AIS track interval
Vector mode
Vector time
VRM
Wiper
Zoom
TT COLLISION
alarm
3
Range*
1
A/C SEA*
1
A/C RAIN*
Automatic Clutter
1
Elimination (ACE)*
1
Gain*
2
IR*
1
Echo stretch*
1
Echo averaging*
1
Picture setting*
(Customize echo)
STBY/TX
Tuning
Reference Point
TT LOST warning
TT alerts ACK
TT acquire
TT/AIS AZ
1
* : When the connected radar is a FAR-2xx8/FAR-3xx0 series radar, these items can
be adjusted from the "Slave" radar.
2
* : When the connected radar antenna is a FAR-3xx0/FAR-2xx8 series magnetron-
type, and the radar is assigned as "Slave", the desired value can be set for these func-
tions. For FAR-3xx0/FAR-2xx8 series SSD-types, these functions cannot be con-
trolled.
3
* : The desired value can be set when the radar is assigned as "Slave", however the
maximum displayable range is dependent on the setting at the "Master" radar.
Control Master Display Option
Independent Desired value can be set
Dependent
Control
Independent
Common Item Commonly Controlled Item Commonly Controlled
Control
1. OPERATIONAL OVERVIEW
Slave Display Option
Desired value can be set
Cannot control
Desired value can be set
1-91