Furuno FAR-2218 Operator's Manual page 115

Note: If the blind sector and the direction of the PM antenna overlap one another, turn
off the blind sector in order to display echoes correctly.
The radar is automatically set as follows when the performance monitor is activated.
Setting
[GAIN]
[SEA]
[SEA AUTO]
[RAIN]
[RAIN AUTO]
[TUNE]
(Shown for magnetron
radars only)
[TX CH]
(Shown instead of [TUNE]
for solid-state radars only)
[ACE]
[ES]
[EAV]
[IR]
[NOISE REJECT]
[VIDEO CONTRAST]
[PULSE]
[2ND ECHO REJ]
[LOW LEVEL ECHO]
[WIPER]
[CUSTOMIZED ECHO]
[PRESENTATION
MODE]
[RANGE]
[OFF CENTER]
Antenna revolution
[VIDEO CONTRAST
TYPE]
1
* : Gain is automatically set according to [PM GAIN ADJ], if it was adjusted at installation.
2
* : [NORTH UP RM] is selected when the [PRESENTATION MODE] is set to [NORTH UP TM].
3
* : The setting is not memorized.
4
* : The performance monitor is deactivated if the range is changed manually.
5
* : Range units other than NM are available for B/W-types only.
6
* : When Ice Mode is enabled, the video contrast setting for Ice Mode is used.
Setting at PM
activation
1
70 *
0
MAN
0
MAN
AUTO
CH1
OFF
OFF
OFF
2
OFF
4-B
LONG
OFF
Previous setting kept,
fixed.
OFF
Previous setting kept,
fixed.
2
No change. *
24 NM, 24 SM, 48 km,
5
48 kyd*
OFF
24 rpm
6
4-B*
1. OPERATIONAL OVERVIEW
Adjustable
while PM Setting at PM deactivation
is active
Setting before PM activation.
3
Yes *
No Setting before PM activation.
No Setting before PM activation.
No Setting before PM activation.
No Setting before PM activation.
No Setting before PM activation.
No Setting before PM activation.
No Setting before PM activation.
No Setting before PM activation.
No Setting before PM activation.
No Setting before PM activation.
No Setting before PM activation.
No Setting before PM activation.
No Setting before PM activation.
No Setting before PM activation.
No Setting before PM activation.
No Setting before PM activation.
No Return to active display.
Yes Setting at PM deactivation.
Setting before PM activation.
4
Yes *
Yes Setting at PM deactivation.
No Setting before PM activation.
No Setting before PM activation.
1-93