Furuno FAR-2218 Operator's Manual page 257

ALR ALF
Alert ID Alert ID
782 194,6
Remedy: Press the ALARM ACK key. Restore signal or rectify reason for signal loss.
48 194,7
Remedy: Press the ALARM ACK key. Restore signal or rectify reason for signal loss.
727 194,8
Remedy: Press the ALARM ACK key. Restore signal or rectify reason for signal loss.
781 194,9
Remedy: Press the ALARM ACK key. Restore signal or rectify reason for signal loss.
783 194,10
Remedy: Press the ALARM ACK key. Restore signal or rectify reason for signal loss.
784 194,11
Remedy: Press the ALARM ACK key. Check IP settings and assign a unique IP address.
785 194,12
Remedy: Press the ALARM ACK key. Check IP settings and assign a unique IP address.
786 194,13
Remedy: Press the ALARM ACK key. Restore the signal or rectify the reason for the signal loss.
788 194,15
Remedy: Press the ALARM ACK key. Consult you local dealer for a software update.
495 52495,1
Remedy: Press the ALARM ACK key. Confirm Own Ship location and adjust as necessary.
- 52540,1
Remedy: Press the ALARM ACK key. Check power to AIS unit.
APPENDIX 3 ALERT CODES, MESSAGES & MEANINGS
Alert title
SYSTEM ERROR
SYSTEM ERROR
SYSTEM ERROR
SYSTEM ERROR
SYSTEM ERROR
SYSTEM ERROR
SYSTEM ERROR
6
SYSTEM ERROR*
6
SYSTEM ERROR*
ANCHOR WATCH
AIS MSG
Priority &
Category
Warning Message: "PM COM ERROR"
Cat: B Meaning: PM communication error.
Warning Message: "TUNE ERROR"
Cat: B Meaning: TUNE error due to faulty set-
tings or malfunction.
Warning Message: "RADAR ANT COM ER-
Cat: B ROR"
Meaning: Signal between processor
and antenna interrupted/lost.
Warning Message: "MTR-DRV COM ERROR"
Cat: B Meaning: Signal between antenna's
SPU and MTR-DRV interrupted/lost.
Warning Message: "RF-CONVERTER COM
Cat: B ERROR"
Meaning: Signal between antenna's
SPU and RF-CONVERTER interrupt-
ed/lost.
Warning Message: "LAN1 NETWORK ERROR"
Cat: B Meaning: LAN1 IP address is use by
other equipment.
Warning Message: "LAN2 NETWORK ERROR"
Cat: B Meaning: LAN1 IP address is use by
other equipment.
Warning Message: "RP COM ERROR"
Cat: B Meaning: Signal between MAIN board
and RP board in the processor is inter-
rupted or lost.
Warning Message: "RP VERSION MISMATCH"
Cat: B Meaning: MAIN board and RP board
software versions do not match.
Warning Message: "OUT OF ANCHOR
Cat: B WATCH ZONE"
Meaning: Ship position outside set an-
chor watch zone.
Caution Message: "TRANSMIT ERROR"
Cat: B Meaning: Unable to transmit AIS bina-
ry message.
Alert description
AP-13