Using Your Clié™ Handheld With Your Computer; Step 1: Installing The Software On Your Computer - Sony PEG-TJ25 CLIE Handbook (primary manual) Operating Instructions Manual

Using your CLIÉ™ handheld with your computer
Palm™ Desktop for CLIÉ stored on the supplied Installation CD-ROM
must be installed on your computer. The software is used for data transfer
between your CLIÉ handheld and computer, and handling data on your
computer such as Address Book.
b
For details on the system requirements of computer, refer to "System requirements"
on page 58.
When Palm™ Desktop for CLIÉ is installed on your computer, CLIÉ
Manuals is also installed on your computer.
b
For details on CLIÉ Manuals, refer to "Using CLIÉ Manuals with your computer"
(page 35).
Step 1: Installing the software on your
computer
Do not connect your CLIÉ handheld to your computer
before installing the software. Otherwise, the
software may not be installed properly.
Notes
• Do not simply copy the Palm™ Desktop for CLIÉ folder from the supplied
Installation CD-ROM to your computer. To install the software properly, follow
the installation procedure described below.
• If you use Windows 2000 Professional or Windows XP, log on with a User Name
in the Administrators group before installing the software.
• If you have more than one CLIÉ handheld and the older version of Palm™
Desktop for CLIÉ has already been installed on your computer, follow the
installation procedure below to upgrade to the new version.
* If you are using PEG-N710C Series or PEG-S300 Series, refer to your CLIÉ
handheld support website. (Refer to the URL shown on the back cover of this
manual.)
b
For details, refer to "Transferring data from another CLIÉ™ handheld" in
"Handbook" (PDF format).
Continued on next page
• • • • • • • • • • • • • • • • • • • • •
15