Table of Contents
Advertisement
Pre-Installation
To protect against loss due to damage incurred in transit,
complete the following checklist upon receipt of the unit.
A more in depth list is included with the packing list
adhered to the side of the shipping crate.
•
Inspect the individual pieces of the shipment before
accepting the unit. Check for obvious damage to the
unit or packing material.
•
Inspect the unit for concealed damage as soon as
possible after delivery and before it is stored.
Concealed damage must be reported within 15 days.
•
If concealed damage is discovered, stop unpacking the
shipment. Do not remove damaged material from the
receiving location. Take photos of the damage, if
possible. The owner must provide reasonable
evidence that the damage did not occur after delivery.
•
Notify the carrier's terminal of the damage
immediately, by phone and by mail. Request an
immediate, joint inspection of the damage with the
carrier and the consignee.
•
Notify the Trane sales representative and arrange for
repair. However, do not repair the unit until damage is
inspected by the carrier's representative.
After completing the inspection checklist, identify the unit
with the unit nameplate, packing list and ordering
information. The unit nameplate is mounted inside the
control box.
See
"Model Number Descriptions," p. 5
that can be found on the nameplate.
Check all items against the shipping list. Verify that it is the
correct unit and that it is properly equipped. If optional
neoprene pads (or other ship-loose items) are ordered,
they are secured in place on the shipping skid or inside the
unit control box.
This Installation, Operation and Maintenance manual, the
Controls IOM, checklists and other pertinent documents
can also be found in the unit control box. Be sure to read
all of this literature before installing and operating the unit.
CG-SVX044B-EN
for additional data
9
Advertisement
Table of Contents
