Sony ZS-M35 Primary Operating Instructions Manual page 7

4
5
Notes
After you
•
stop recording, do not
disconnect the AC
power cord or move
the player while "TOC
EDIT" is flashing in the
display. If you do so,
recording may not be
done properly.
• When you record a
whole CD, you cannot
pause recording.
Tips
• Adjusting the volume or
the audio emphasis
(page 49) will not affect
the recording level.
Keep the volume at a
moderate level so as to
prevent the sound from
skipping.
• To record over the
previous recording, see
page 33.
• Once the clock is set, the
recording date and time
are stamped
automatically (page 50).
• You can label an MD or a
track during recording
(page 44).
To record at high speed, press
HIGH SPEED.
The indicator lights up.
To record at normal speed, skip this step.
Press SYNCHRO REC CD N
MD.
The player starts recording
automatically.
If the MD has any previous
recording, recording will be
made from the last recorded
position.
Use these buttons for additional operations
POWER
To
stop recording
turn on/off the player
If "CD>MD OK?" alternates with time display
There is not enough space on the MD to record the whole
CD.
If it is all right to record as much as possible and cancel
recording of some tracks, press YES•ENTER. To stop
recording, press NO•CANCEL.
If any other messages are displayed, see page 72.
Track number
of MD
CD x
MD x
Press
MD x or CD x
POWER
Remaining
recording
time of MD
YES
ENTER
NO
CANCEL
7
Basic Operations