Connecting The Ac Power Cord; Inserting Batteries Into The Remote - Sony ZS-M35 Primary Operating Instructions Manual

3 Connecting the AC power cord

Insert one end of the supplied AC power cord to the
AC IN socket located at the rear of the player, and the
other end to the wall outlet.
About the demonstration mode
The player enters the demonstration mode about 10
seconds after you connected the AC power cord to the
wall outlet. Demonstration indications such as
"DEMONSTRATION" and "PERSONAL MD
SYSTEM ZS-M35" appear in the display one after
another.
The player also enters the demonstration mode if you
do not operate the player for about one minute after
you turned it on.
To exit the demonstration mode, set the clock of the
player (page 50).

4 Inserting batteries into the remote

Insert two size AA (R6) batteries (not supplied)
Replacing batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the
player, replace all the batteries with new ones.
59
Setting Up