Sony ZS-M35 Primary Operating Instructions Manual page 21

Tips
• If the program play is
finished, the program
is saved. You can play
the same program
again by pressing u.
• If you open the lid of
the CD compartment,
the program is erased.
• If you take out the MD,
the program is erased.
• During play, total
programed time cannot
be displayed.
To cancel Program Play
Stop play first. Then, press SHUF/PGM until "PGM"
disappears from the display.
To check the order of tracks before play
Before starting the program play, press YES•ENTER.
Every time you press YES•ENTER, the track number
appears in the programed order.
To change the current program
Change before starting the program play.
To
erase the last track in
the program
change the whole
program completely
Do this
1 Press NO•CANCEL.
The track programed last is
erased.
2 Re-enter the track numbers by
pressing the number/character
buttons.
1 Press x to erase the whole
program.
2 Create a new program
following the programing
procedure.
The CD Player•The MD Player
21