Siemens CP 1243-8 IRC Operating Instructions Manual page 87

Status
84xx
8500
8501
8502
8535
8550
8554
85xx
Include value
If you enable the option "Include value", the CP sends a value for the placeholder $$ from
the memory area of the CPU in the message. To do this, you configure a PLC tag whose
value is integrated in the message.
The value is entered in the message text instead of the placeholder $$.
CP 1243-8 IRC
Operating Instructions, 06/2015, C79000-G8976-C385-01
Meaning
Other error message from the e-mail server
Apart from the leading "8", the status corresponds to the three-digit error number of the
SMTP protocol.
Syntax error: Command unknown.
This also includes the error of having a command chain that is too long. The cause may be
that the e-mail server does not support the LOGIN authentication method.
Try sending e-mails without authentication (no user name).
Syntax error. Check the following configuration data:
Message configuration > Message parameters:
Recipient address ("To" or "Cc").
•
Syntax error. Check the following configuration data:
Message configuration > Message parameters:
Email address (sender)
•
SMTP authentication incomplete. Check the "User name" and "Password" parameters in
the CP configuration.
SMTP server cannot be reached. You have no access rights. Check the following configu-
ration data:
CP configuration > E-mail configuration:
•
– User name
– Password
– Email address (sender)
Message configuration > Message parameters:
•
– Recipient address ("To" or "Cc").
Transfer failed
Other error message from the e-mail server
Apart from the leading "8", the status corresponds to the three-digit error number of the
SMTP protocol.
Configuration and operation
4.7 Configuration in STEP 7 Basic
87