®
FyreWrap Fire Protective Wrap System Installation
The FyreWrap fire protective wrap system included with the MicroflexAdvance MXA910 ceiling array microphone must be in
stalled to meet the UL 2043 plenum rating (suitable for air handling spaces).
Installation
1.
Make sure the microphone surface is clean to ensure proper adhesion
2.
Remove the paper backing from the 4 adhesive pads on the fire wrap system
3.
Align the fire wrap system over the microphone and secure it by applying gentle pressure over the adhesive pads
Note: make sure to leave enough space to install the Ethernet cable and safety tether (if required).
Shure Incorporated
22/59