Status And Error Displays - Siemens SIRIUS 3RW5 Manual

7.1.2

Status and error displays

"DIAG" LED
State
"BUS" LED
State
SIRIUS 3RW5 EtherNet/IP communication module
Manual, 05/2019, A5E45131885002A/RS-AA/001
Meaning
There is an EtherNet/IP connection between the 3RW5 communication
module and the controller.
Lights up green
Standby:
The 3RW5 soft starter is not configured.
•
Flashes green
The 3RW5 communication module is not parameterized.
•
Irreversible error
•
Error can only be acknowledged by switching the control supply voltage
•
Lights up red
off and on again.
Reversible error (e.g. loss of the IP address due to an address conflict)
•
Firmware update
•
Flashes red
No supply voltage available.
Off
Meaning
At least one CIP connection and no timeout of the exclusive owner
connection.
Lights up green
An IP address is configured.
•
No CIP connection
•
Flashes green
IP address conflict
•
Firmware update
•
Lights up red
Timeout of an exclusive owner connection:
Control was stopped without connection termination.
•
Flashes red
Interruption of the Ethernet communication.
•
Device has not yet received an IP address.
•
Off
No supply voltage available.
•
Messages and diagnosis
7.1 LED display
53