Configuring; Configuring The 3Rw5 Soft Starter In The Ethernet/Ip System - Siemens SIRIUS 3RW5 Manual

Configuring

6.1

Configuring the 3RW5 soft starter in the EtherNet/IP system

Requirements
● Mounted 3RW5 EtherNet/IP communication module
The 3RW5 soft starter automatically detects the presence of the
3RW5 communication module when it is switched on.
● EtherNet/IP system
– Scanner (programmable logic controller)
– Adapter (3RW5 EtherNet/IP communication module)
● Configuration software of the controller (e.g. Rockwell Studio 5000 with EDS file)
● Parameterization software (e.g. SIRIUS Soft Starter ES (TIA Portal)) (optional)
● Fundamental knowledge in working with EtherNet/IP (e.g. for IP parameters (Page 45))
Note
Full functional scope
In order to be able to use 3RW5 soft starters without any difficulties and with their full range
of functions, ensure that you have the latest firmware and software updates:
• 3RW5 soft starter, 3RW5 communication module, 3RW5 HMI High Feature
• EDS file
• SIRIUS Soft Starter ES (TIA Portal)
The latest downloads are available on the Internet
(https://support.industry.siemens.com/cs/ww/en/ps/16212/dl).
SIRIUS 3RW5 EtherNet/IP communication module
Manual, 05/2019, A5E45131885002A/RS-AA/001
6
39