Technical Specifications - NETGEAR Orbi Pro Ceiling Satellite User Manual

Table 4. Factory default settings Orbi Pro Ceiling Satellite (Continued)
Feature
WiFi WiFi communication
SSID name
Security
Broadcast SSID
Transmission speed
Country/region
RF channel
1
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.

Technical specifications

The following table shows the technical specifications for the Orbi Pro Ceiling Satellite.
Table 5. Technical specifications Orbi Pro Ceiling Satellite
Feature
Data and routing protocols
Ethernet interfaces
Supplemental Information
Orbi Pro Ceiling Satellite
Default Setting
Enabled
See satellite label
WPA2-PSK (AES)
Enabled
Auto.
United States, if purchased in the US
2.4 GHz fronthaul and backhaul: Auto
5 GHz fronthaul:
• North America and Australia: channel 48
• Europe and Japan: channel 36
5 GHz backhaul:
• North America and Australia: channel 157
• Europe and Japan: channel 108
Description
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP,
and SMB
Two 10/100/1000 Mbps Gigabit LAN Ethernet ports:
LAN 1 port is a PoE+ port
LAN 2 port is a second LAN port for a LAG configuration in combination
with LAN 1 port.
38
1
User Manual