Sync Your Satellite Using The Orbi Pro Router Web Interface - NETGEAR Orbi Pro Ceiling Satellite User Manual

Color
Blue
Amber
Magenta
Note: After your satellite syncs with your router, the satellite's Sync button is disabled
for security reasons. If you press the Sync button and the satellite's LED bar pulses
magenta, this LED behavior indicates that the Sync button is disabled. For information
about enabling the Sync button, see Enable the Sync button on page 23.

Sync your satellite using the Orbi Pro router web interface

You can use the Orbi Pro router web interface (not the satellite web interface) to add a
satellite to your Orbi network.
To add a satellite to your Orbi network using the router web interface:
1. For the sync process, place your Orbi Pro satellite in an area near your Orbi Pro
router.
For example, place your satellite in the same room as your router, but not too close
to the router. We suggest that you keep a distance of 20–25 feet (about 6–7 meters)
between the satellite and the router.
2. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
3. Enter orbilogin.com.
A login window opens.
4. Enter the router admin user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
5. Select Add Orbi Satellite.
The Place Your Satellite page displays.
6. Connect your satellite to a power source.
Overview
Orbi Pro Ceiling Satellite
LED Behavior
The Orbi Pro router and satellite synced, and the connection between the router and
satellite is good.
The Orbi Pro router and satellite synced, but the connection between the router and
satellite is only fair. Consider moving the satellite closer to the router.
The Orbi Pro router and satellite did not sync. Move the satellite closer to the router
and try again.
16 User Manual