NETGEAR Orbi Pro Ceiling Satellite User Manual page 37

Factory settings
The following table shows the factory default settings for the Orbi Pro Ceiling Satellite.
Table 4. Factory default settings Orbi Pro Ceiling Satellite
Feature
Router and satellite User login URL
login
User name (case-sensitive)
Default login password (case-sensitive)
Internet connection WAN MAC address
WAN MTU size
Port speed
Local network (LAN) LAN IP address
Subnet mask
DHCP server
Time zone
Time zone adjusted for daylight saving
time
SNMP
Firewall Inbound (communications coming in from
the Internet)
Outbound (communications going out to
the Internet)
Source MAC filtering
Supplemental Information
Orbi Pro Ceiling Satellite
Default Setting
orbilogin.com or orbilogin.net
admin
password
Uses the default hardware address
1500
AutoSensing
192.168.1.250
255.255.255.0
Disabled
(The DHCP server of the Orbi Pro router issues
IP addresses.)
Worldwide: GMT
North America: GMT-8
Greece: GMT+1
Disable
Disabled
Disabled (except traffic on port 80, the HTTP
port)
Enabled (all)
Disabled
37 User Manual