Place Your Satellite; Sync Your Orbi Pro Satellite; Sync A Satellite From An Orbi Pro Wifi System - NETGEAR Orbi Pro SRR60 User Manual

Orbi Pro Router Model SRR60 and Orbi Pro Satellite Model SRS60

Place your satellite

Your satellites must be within range of your router's WiFi signal in order for it to sync
with the router. Use the satellite's ring LED to help you determine where to place your
satellite.

Sync your Orbi Pro satellite

The sync process for your Orbi Pro satellite depends on whether your satellite came
with your Orbi Pro WiFi system, or if your satellite is an add-on satellite.

Sync a satellite from an Orbi Pro WiFi system

The Orbi Pro WiFi System includes an Orbi Pro router and a Orbi Pro satellite. The Orbi
pro satellite in the WiFi system is preset to automatically find and sync to the WiFi signal
from the Orbi Pro router in the same WiFi system.
To sync your Orbi Pro satellite:
1. Place your satellite.
For more information, see Place your satellite on page 18.
2. Connect the satellite to a power source.
3. If the Power LED on the back of the satellite does not light, press the Power On/Off
button.
The satellite ring LED pulses white. The satellite automatically finds the Orbi router's
WiFi signal and attempts to sync to the Orbi router.
The satellite ring LED lights one of the following colors for about three minutes and
then turns off:
• Blue. The Orbi router and satellite successfully synced, and the connection
between the router and satellite is good.
• Amber. The Orbi router and satellite successfully synced, and the connection
between the router and satellite is fair. Consider moving the Orbi satellite closer
to the Orbi router.
• Magenta. The Orbi router and satellite failed to sync.
Overview 18 User Manual