Troubleshooting - Sony ZS-M50 Operating Instructions Manual

Troubleshooting

Symptom
There is no audio.
The picture of your TV becomes
unstable.
Various indications appear in the
display one after another.
The CD does not play./"No Disc"
lights in the display even when a
CD is in place.
The sound drops out.
An incompletely inserted MD
cannot be pulled out.
"Disc Error" lights in the display
and the player does not operate.
The MD does not play.
72 GB
Additional Information
Remedy
• Press OPERATE to turn on the player.
• Connect the mains lead securely.
• Adjust the volume.
• Unplug the headphones from the 2 jack when
listening through speakers.
• Wait until "TOC Reading" disappears from the
display.
• Move the player away from the TV.
• The player is in the demonstration mode
(DISPLAY has been held down for more than 2
seconds). n Hold down DISPLAY for more
than 2 seconds to exit the demonstration mode.
• Make sure that the CD compartment is closed.
• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
• Reduce the volume.
• Clean the CD, or replace it if the CD is badly
damaged.
• Place the player in a location free from
vibration.
• The MD player's self-lock system has gripped
the MD. Insert the MD completely, then press
6 MD EJECT.
• Take the MD out and insert it again. If "Disc
Error" remains, replace the MD. Try erasing all
tracks on the MD (page 42).
• Take out the MD and leave the player in a warm
place for several hours until the moisture
evaporates.
• The MD is inserted in the wrong direction.
Slide the MD into the disc compartment with
the label side up and the arrow pointing
towards the opening until the player grips it.
• The MD may be blank (the music calendar does
not appear). Replace the disc with one that has
been recorded.