Table of Contents
Advertisement
Frequency Selection: JCLK1
JCLK1
Note:
The JCLK1 is set at 133 MHz as factor default setting.
Clear CMOS Header: JCMOS1
By placing the jumper on pin2-3, it allows user to restore the BIOS safe
setting and the CMOS data, please carefully follow the procedures to
avoid damaging the motherboard.
JCMOS1
Pin 1-2 close
Pin 2-3 close
※ ※ ※ ※ Clear CMOS Procedures:
1.
Remove AC power line.
2.
Set the jumper to "Pin 2-3 close".
3.
Wait for five seconds.
4.
Set the jumper to "Pin 1-2 close".
5.
Power on the AC.
6.
Reset your desired password or clear the CMOS data.
M7VIZ-SATA
Pin
100 MHz
1-2
Close
3-4
Close
5-6
Open
7-8
Open
Normal Operation (Default).
Clear CMOS data.
13
133 MHz
166 MHz
(Default)
Open
Open
Close
Open
Open
Open
Open
Open
Assignment
Advertisement
Table of Contents
