Ricoh Pro L5130 Rip Settings Manual page 37

Overview
When using the "Apply the
settings from the most recently
submitted job to the new job"
function, the number of copies
and magnification change
incorrectly.
Part of the source image
information may not appear.
When sending print jobs to
RIP-Queue, the "Print Info:"
message appears.
If entering a large number in
the spin box, the application is
terminated forcibly.
The "Status" reports do not
match between RIP-Queue
and Job Editor.
Details
If you check "Apply the settings
from the most recently submitted
job to the new job" in the [Open]
menu, open a file and display
the [Open] menu again, the
"Image" setting may have
changed as follows.
Copies: 0
Magnification: Disabled
(unchecked)
Width: Blank
Height: Blank
When you click the [Printer and
Media] tab "Source Image"
"Format", part of the source
image information may not
appear depending on the
language and source image.
When sending print jobs to RIP-
Queue, the "Print Info:" message
appears in "Status" on the [Print]
tab on the Job Editor screen.
If entering a large number that
exceeds 55 digits in the spin
box, the application is
terminated forcibly.
The "Status" report in the Printer
area of RIP-Queue and that on
the [Print] tab of Job Editor do
not match.
Restrictions on Job Editor
Solution
Change the settings manually.
This does not affect the print job.
This does not affect the print job.
Do not enter a large number
exceeding 55 digits in the spin
box.
The data reported via RIP-Queue
and Job Editor differs.
RIP-Queue reports the printer
status.
Job Editor reports the connection
status with RIP-Queue.
35