Ricoh Pro L5130 Rip Settings Manual page 15

The information retrieved from the printer is listed. You can also print the nozzle check pattern and
recovery check pattern.
1
2
3
4
1. Detailed model name
Displays the printer model name in detail.
2. Printer status
Displays the printer status.
3. Media width
Displays the media width automatically detected by the printer (in mm to two decimal places).
You can update the media width information automatically. For details, see page 23 "Updating the Media
Width Information Automatically".
4. Error/warning message
Displays error and warning messages.
5. Heater setting (present machine setting)
Horizontally displays the heater temperature in the order pre-heater > print-heater > post heater > cure-heater
using a bar chart and displays the value indicated by each bar when you hover over it.
6. Printing the nozzle check pattern
Prints the nozzle check pattern if you click it.
7. Printing the recovery check pattern
Prints the recovery check pattern if you click it.
8. Ink level in the ink cartridges
Horizontally displays the ink levels in ink cartridges 1 to 8 using a bar chart and displays the value indicated
by each bar when you hover over it.
8
9
5 6 7
DWU803
Functions on the Main Menu
13