Page 3
*INSTALL NOTE: For optimum temperature sensor performance, the Bard ECU-Series Controller must be mounted on an interior wall and away from any heat sources, sunlight, windows, air vents, air circulation obstructions, and/or any other cause of erratic or false temperature sensing.
Page 4
3. Enter button to select Advanced and enter Advanced Screen 4. Enter button again to select/enter Applications Screen 5. Controller will ask for Admin Level Password Factory Default Admin Level Password: BARD 6. Down button to highlight Additional Setup 7. Enter button to select/enter Additional Setup Screen 8.
Page 5
System Enabling (Cont’d.) Auto: Conventional System in “Auto-Changeover” mode. HVAC system will cycle heating and cooling automatically to stay within preset heating and cooling Setpoints. Heating: Conventional System in “Heating-Only” mode. HVAC system will cycle heating in reference to Heating Setpoint only.
Page 6
**NOTE: Any system start-up conducted with indoor ambient temperatures lower than 56°F or above 86°F will experience an internal Low-Temperature or High-Temperature alarm. This will not affect normal operation, and can be cleared easily. See the Advanced Programming section for further information.