Cisco Aironet 1520 Series Hardware Installation Manual page 39

Chapter 2 Mounting Instructions
To assemble the pole clamp bracket, perform these steps:
Step 1 Position the strap brackets on the pole clamp bracket for the pole diameter you are using and secure each
strap bracket with two M8 x16 bolts (with lock washers) (see
13 to 15 ft lbs (17.6 to 20.3 Nm).
Figure 2-10
1
M8 x1.25x16 bolts (with lock
washers)
2
Pole clamp bracket
OL-12632-02
Assembled Pole Clamp Bracket and Strap Brackets
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
Figure 2-10). Tighten the bolts to
3
Strap bracket
(shown positioned for 11 to 16 inch diameter pole)
Mounting the Access Point
2-23