Statement - Cisco Aironet 1520 Series Hardware Installation Manual

Installation Guidelines
Figure 2-1
10
1 Building roof-overhang
2
Shielded outdoor-rated Ethernet
(CAT5e or better) cable
3
Water drip loop
6-AWG copper grounding wire
5
Ground rod
1. User supplied.
2. The safety ground wire in the AC power cord must have a ground path to a grounding rod.
3. The shielded Ethernet cable has a ground path through the power injector and the safety ground wire in the AC power cord.
Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning
Cisco Aironet 1520 Series Outdoor Mesh Access Point Hardware Installation Guide
2-10
Components in a Typical Access Point Installation
9
8
7
6
1
1
1
1
2
3
4
5
6 Ground
7
AC power cord
8
Power injector
9
Shielded Ethernet (CAT5e or better) cable
10 Controller (through a switch)
Chapter 2 Mounting Instructions
2
3
OL-12632-02
1