Indoor Unit Installation Drawings - Daikin R32 Split Series Installation Manual

Indoor Unit Installation Drawings

The indoor unit may be mounted in any of the three styles shown here.
Exposed
Mounting
A
plate
Molding
Floor Installation Wall Installation
Location for securing the installation panel.
Mounting plate fixing screw
(field supply: M4 x 25L)
B Titanium Apatite Deodorizing Filter (2)
E Wireless remote
controller
Screws
(Field supply: M3 × 20L)
WARNING
• Only use accessories, optional equipment and spare parts made or approved by DAIKIN.
• Installation shall be done by an installer, the choice of materials and installation shall comply with the applicable legislation.
In Europe, the EN378 is the applicable standard that shall be used.
6
Half concealed
Mounting plate
A
The mounting plate should
A
be installed on a wall which can
support the weight of the indoor
unit.
Front grille
Air filter
Front panel
50mm or more
from walls
F Remote controller
holder
6 4
( 7 0 0 )
0
2 1
3 5
70mm or more
(Unit: mm)
1 3 4
6 4 4
0
1 6
3 5
50mm or more
from walls
Caulk pipe
hole gap
with putty.
■
English