Wireless Remote Controller - Daikin R32 Split Series Installation Manual

Choosing an Installation Site
2.

Wireless remote controller

1) Turn on all fluorescent lamps in the room, if any, and find site where remote controller signals are properly received by
the indoor unit (within 7m).
2) Make the dipswitch settings. Set according to the type of unit purchased by the customer. The default settings are on the
heat pump side.
• For cooling only
Set the dipswitches on the cooling only side.
• For heat pump
Check that the dipswitches are on the heat pump side.
If they are set on the cooling only side, move them to the heat pump side.
■
English
Dipswitches
H/P C/O
Dipswitches
H/P C/O
5