Table of Contents
Advertisement
12 February 1992
6.6 ORIGINAL INVERSION MECHANISM
The two sided originals are
inverted in the feed-out unit.
1) When the Start key is
pressed, the two sided original
is fed into the feed-in unit,
passing over the DF
registration sensor [A]. At the
same time, the feed-out motor
[B] starts turning
The inverter solenoid [C] turns
on 100 milliseconds after the
original's trailing edge passes
the registration sensor
When the inverter solenoid
turns on, the inverter pawls [D]
rotate counterclockwise.
[D]
[B]
13
ORIGINAL FEED
[C]
[A]
[D]
Advertisement
Table of Contents
