2.13 ILS PC Board (621), No Paper Actuator (609), Catch Magnet (730)
(2)
(3)
(5)
(4)
(7)
(6)
(1) Remove the the Front Cover (105), Rear Cover (108)
(Refer to 2.3), Paper Guide Cover (110) (Refer to 2.4),
Control Panel Unit (Refer to 2.5), and Motor Bracket and
Gear Assembly (Refer to 2.11).
(2) Remove the ILS PC Board (621).
(3) Remove the No Paper Actuator (609).
(4) Remove the Paper Sensor (610).
(5) Pull out the Paper Sensor from the rear, and disconnect the
Connector.
(6) 2 Screws (19).
(7) Remove the Catch Magnet (730).
Disassembly
43