(14)
(16)
(17)
(12)
(12) Remove the Stamp Head Assembly.
(11)
Note:
(13) Release the hook on the drive gear.
(14) Remove the B31B61 Drive Gear (314).
(15) Remove the Idle Shaft (331) and the B18 Drive Gear
(15)
Note:
(16) Remove 2 Latch Coil Springs (303).
(17)
(16)
(17) Remove 2 Latches (302).
(11) Remove the Scanner Glass (341).
Before reassembling, clean both sides of the Scanner Glass
(341) with a soft cloth, soaked with isoproyl alcohol.
(348).
Apply Molykote EM-502L Grease to the Idle Shaft (331).
Disassembly
31