Panasonic UF-885 / 895
6.2.7
Transmit Motor Control Circuit
The transmit motor is a stepper motor powered by +24 VDC and driven by a 1/2-phase excitation, greater step division is provided
by controlling the phase circuit in steps.
The stepping signal and chopping current control signals (pTINA, pTTDA, pTINB and pTTDB) are sent to the chopper drive circuit,
comprised of IC190 and its peripheral circuitry, from the IC150 (S-CPU) output port.
S-CPU
IC150
211
Tx Motor Driver Circuit Block Diagram
Motor Control Signal
(pTINA, pTTDA, pTINB and pTTDB)
+5V
Q193
Q194
MGND
+24V
+5V
Motor
Driver
IC190
MGND
F190
Transmit Motor