Table of Contents
Advertisement
5. Installing the Ink Cartridges
Filling with Ink for the First Time
Special procedures are required when installing ink cartridges for the first time. These are required only once, when
installing ink cartridges for the first time after shipment from the factory. Be sure to carry out this operation according
to the procedure described below.
Never under any circumstances use anything other than the specified type of ink or cleaning fluid.
Installing the Ink Cartridges
Be sure to follow the on-screen instruc-tions
for insertion and removal.
➢ Insert in the direction shown in the figure.
➢ Insert and remove slowly, one at a time.
➢ Insert firmly, as far as it will go.
During cleaning, you insert and remove cartridges several times. The on-screen messages indicate which to insert and
remove, and when to insert and remove them.
Insert each color ink cartridge into the slot labeled with the matching color. The cleaning cartridges are not differenti-
ated by color.
CAUTION
36
Never insert your hand or fingers into the opening of the front cover.
The print heads move at high speed inside the cover. Contact may cause injury.
SET SOL CL-LIQUID
1
6 7
Slot number
!
12
"
#
$
Hide quick links:
Advertisement
Table of Contents
