Sony HT-AF5 Operating Instructions Manual page 7

Inserting batteries into the
remote
Insert two R6 (size-AA) batteries into
RM-AAU074 Remote Commander.
Observe the correct polarity when installing
batteries.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with old ones.
• Do not mix manganese batteries and other kinds of
batteries.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
• When you replace the batteries, the remote buttons
may be reset to their initial settings. If this
happens, reassign the buttons again (page 60).
• When the remote no longer operates the system,
replace all the batteries with new ones.
7
GB